House Washing in Louisville, Ohio
In the old center you are working on frame and brick houses with painted trim, original porch decking and mortar that has been in the weather for a century — soft washing only, low pressure, with the rinse controlled so nothing runs into masonry joints.
The mid-century and later subdivisions are the opposite problem: asphalt shingle roofs that streak on the shaded plane, vinyl and aluminum siding that chalks and oxidizes on the sun side, and wide concrete drives and aprons that hold road salt through spring.
Because the subdivisions arrived in waves, siding age varies a lot inside a single block, and we adjust chemistry per elevation rather than per neighborhood.
Siding age varies inside a single Louisville block, and so does condition within a single house.
The sun-facing wall and the shaded one rarely need the same mix — one is usually chalked and the other is usually growing something.
That mix is why the method is set house by house — a 1900s frame house near Chapel Street and a 1990s vinyl two-story off a newer cul-de-sac have almost nothing in common but the weather.
How we do it
Forcing water behind siding or into seals and vents causes moisture problems, not a cleaner house. A controlled, low-pressure approach protects those openings while still lifting dirt and organic growth.
- Inspect & Protect. We inspect exterior materials and protect applicable plants and fixtures before starting.
- Low-Pressure Solution. We apply a surface-appropriate cleaning solution at low pressure.
- Gutter Faces, Downspouts, Soffit & Fascia. The outside faces of the gutters and downspouts are cleaned, and soffit and fascia are washed. Clearing debris from inside the trough is a gutter clean-out — a separate service, and one that comes free with roof soft washing.
- Careful Rinse. We rinse carefully without forcing water behind siding, seals, vents, or openings.
The method does not change from one town to the next — what changes is what we find when we get there. The full house washing page has the rest of it.
What it costs in Louisville
Louisville splits between older houses around the original town center and mid-century and newer subdivisions. A home up to 1,500 square feet is {{price:house-wash:1500}}, one story or two. Roof soft washing is priced on roof area rather than home size — {{price:roof:1000}} for a roof up to 1,000 square feet — which on the subdivision stock is usually the simpler half of the job.
Every residential price is published, and the figure you accept is the figure you pay. Find your home’s square footage — it is on your county auditor listing — and you have your price. See the full price list.
Where we work in Louisville
- Historic downtown Louisville
- Main Street
- Chapel Street area
- Nickelplate Street area
- East Gorgas Street area
- Lincoln Court
- St. Louis Court
- Center Court
- Metzger Park area
- Route 62 subdivisions
Also in Louisville
House Washing in other towns we cover
Worth reading first
House Washing in Louisville — common questions
Why would one wall of my Louisville house need a different mix than another?
Because the subdivisions here arrived in waves, siding age varies a lot inside a single block — and sometimes inside a single house, where an addition is twenty years newer than the original. Vinyl and aluminum that has faced the sun for decades chalks and oxidizes, while the shaded elevation on the same house is carrying organic growth instead. Those are two different problems with two different solutions, so we walk the full perimeter with you on the day and confirm the estimate you already have rather than guessing from the driveway, and we adjust chemistry per elevation instead of per neighborhood. The written scope names each surface so you can see what is being treated where. Why a wash leaves chalky siding chalky-looking, and what actually improves it, is explained in [why a wash will not bring the color back](/learn/why-a-house-wash-will-not-fix-chalky-siding).
Do you serve Louisville and Alliance?
Yes. Eastern Stark County is regular territory and both are an easy drive from our Canton base. We handle residential house washing, roof soft washing, and concrete work there, along with storefront and small-commercial exterior maintenance. Scheduling is straightforward at that distance, so you can pick your preferred windows when you accept your estimate. You can get your own number right now: the [instant estimate](/instant-estimate) prices your property from the address in about two minutes, and what you accept is what you pay.
Do you cover the Stark County suburbs around Canton?
Yes. North Canton, Massillon, Louisville, Uniontown, and Hartville sit close enough together that a property in any of them can usually be seen in person without that becoming its own trip. The housing across them ranges from century brick near the Canton core to new-build stone and vinyl in Lake Township, so the method is set house by house rather than by which suburb it sits in. Put your address into the instant estimate for a price in about two minutes, or call if you would rather talk it through. You can get your own number right now: the [instant estimate](/instant-estimate) prices your property from the address in about two minutes, and what you accept is what you pay.
Which surfaces on my house actually need cleaning first?
On a Louisville subdivision house, usually the drive and the roof before the siding. The asphalt shingle roof streaks on the shaded plane and is soft washed, never pressured. The vinyl or aluminum siding chalks and oxidizes on the sun side, which is an oxidation treatment rather than a wash and can often hold another season. And the wide concrete drives and aprons here hold road salt through spring, which is both the most visible surface and the one that degrades if it is left. You can get your own number right now: the [instant estimate](/instant-estimate) prices your property from the address in about two minutes, and what you accept is what you pay.
Learn More — what siding oxidation is and why pressure washing won't fix it
My house is in the old center of Louisville. What is the method there?
Soft washing only, at low pressure, with the rinse controlled so nothing runs into masonry joints. In the old center you are working on frame and brick houses with painted trim, original porch decking and mortar that has been in the weather for a century. The downtown Louisville Historic District is on the National Register, and Saint Louis Catholic Church — completed in 1870 and dedicated in 1878 — is separately listed, which tells you what era of material is standing on those streets. Buildings that age get gentle chemistry and no high pressure, and porch decking gets deck-safe treatment rather than a house-wash pass.
Our building is on the Route 62 corridor. Is a maintenance interval worth it?
For a building with a drive-thru pad, service doors and a dumpster enclosure, yes — those surfaces need an interval rather than an annual scramble, because grease and traffic staining rebuild steadily and a once-a-year clean spends most of the year looking overdue. The Route 62 corridor from Canton through Louisville to Alliance is retail-lined, which means we can route multiple accounts on the same trip and price the interval accordingly. Downtown Main Street is the other category: entryways, sidewalk frontage and awning-shaded concrete that reads dingy long before an owner notices, since shade hides the drift. The [maintenance plan](/maintenance-plan) is built for exactly this: an autumn visit, next year's price held, and a longer roof warranty.
What is the difference between gutter cleaning, a gutter clean-out and gutter brightening?
Three different jobs on the same piece of metal. Gutter cleaning is the outside face of the gutter and downspout. It comes with a house wash or a siding cleaning at no extra cost. A gutter clean-out is interior work: removing packed leaves, shingle grit and sediment from inside the trough, then flushing each downspout to confirm water runs through it. It is included free with roof soft washing, because roof work puts debris into the gutters by design. It is also sold on its own, priced per linear foot, with no other service required. Gutter brightening removes the dark vertical striping bonded to the front face, often called tiger striping. That is oxidized aluminum and road film chemically stuck to the finish, so it needs a dedicated product and will not come off with house wash solution. It is never included in a house wash. A quick way to tell what you need: if the inside is full, you need a clean-out. If the outside is streaked dark, you need brightening. If neither, the cleaning that comes with your wash is enough. The gutter clean-out is free with a roof soft wash and 25% off added to a house wash, and the rate is published on the [pricing page](/pricing). More on what the gutters do to a roof in [black streaks, moss and lichen](/learn/roof-moss-lichen-algae-damage). Why a wash leaves chalky siding chalky-looking, and what actually improves it, is explained in [why a wash will not bring the color back](/learn/why-a-house-wash-will-not-fix-chalky-siding). You can get your own number right now: the [instant estimate](/instant-estimate) prices your property from the address in about two minutes, and what you accept is what you pay.
My 1977 colonial needs everything. Where should I start?
Roof first, then siding, then concrete — because each one drains onto the next. A colonial of that era in Solon typically means two full stories of siding, a steep roof with multiple planes, and a driveway poured around the same time. The roof is soft washed at height without touching the shingle. The sun-facing walls are usually chalked and need oxidation treatment rather than a wash. And a drive that has held nearly fifty winters of road salt is surface cleaning with stain treatment. Three different methods, three different outcomes, and most owners take them across two seasons. Why a wash leaves chalky siding chalky-looking, and what actually improves it, is explained in [why a wash will not bring the color back](/learn/why-a-house-wash-will-not-fix-chalky-siding). You can get your own number right now: the [instant estimate](/instant-estimate) prices your property from the address in about two minutes, and what you accept is what you pay.
Learn More — what siding oxidation is and why pressure washing won't fix it
Do you charge more for a two-story house?
No. One price covers the house at that size, whether it is one story or two. A 1,200 square foot home is $299 either way, and a 2,000 square foot home is $349 either way — you read your price off the table without doing arithmetic or wondering which column applies to you. A second story does take longer and needs more reach, and that is already built into the size-based price rather than added on top. Genuine difficulty does carry an add-on: a third story, or an elevation that cannot be worked from the ground. Anything like that is identified while the property is walked and stated before the work starts, never added afterward. You can get your own number right now: the [instant estimate](/instant-estimate) prices your property from the address in about two minutes, and what you accept is what you pay.
Can faded color on oxidized siding be brought back?
Often yes, as an optional treatment separate from a standard wash. A house wash removes the dirt and organic growth sitting on the siding; restoring color means treating the oxidized surface layer itself, which is a different product and a different process. How much comes back depends on how far the oxidation has progressed and how evenly the panel has chalked, and heavily degraded siding can improve without returning to its original color. We look at the siding and tell you what is realistic before you commit to it. Why a wash leaves chalky siding chalky-looking, and what actually improves it, is explained in [why a wash will not bring the color back](/learn/why-a-house-wash-will-not-fix-chalky-siding).
Learn More — what siding oxidation is and why pressure washing won't fix it